Teledyne LeCroy ADP300_305 - Manual (Page 29)

Operator’s Manual
Performance Verification Test Record
This record can be used to record the results of measurements made during the
performance verification of the ADP300/ADP305 Active Differential Probe.
Photocopy this page and record the results on the copy. File the completed
record, as required by applicable internal quality procedures.
The test record corresponds to the parameters tested in the performance
verification procedure. The numbers preceding the individual data records
correspond to the steps in the procedure that require the recording of data.
Results to be recorded in the column labeled "Test Result" are the actual
specification limit checks. Test limits are included in all of these steps.
Other measurements, and the results of intermediate calculations that support
the limit check, are to be recorded in the column labeled "Intermediate Results".
Permission is granted to reproduce these pages for the purpose of recording test
results.
923079-00 Rev A 25