Teledyne LeCroy ADP300_305 - Manual (Page 19)

Operator’s Manual
Probe Coupling
PRx:COUPLING, PRx:CPL
Command/query
Description
The PRx:COUPLING command selects the coupling mode of the
ADP30x probe.
The PRx:COUPLING? query returns the coupling mode of the
selected channel.
Command
Syntax :CouPLing :={PR1,
PR2, PR3, PR4} :={DC, GND}
Query Syntax :CouPLing?
Response
Format :CPL
Example
The following command sets the coupling to DC in the ADP30x
differential probe connected to channel 2.
CMD$=:PR2:CPL DC": CALL IBWRT(SCOPE%,CMD$)
923079-00 Rev A 15