IAI America RCS2-RTC12L - Manual (Page 45)

39
9. Motor/Encoder Cables
[3] Limit switch cable CB-X-LC***
[4] Encoder cable with LS CB-X2-PLA***
(Front view)
Controller end Actuator end
(Front view)
* *** indicates the cable length (L). Up to 30 m can be specified.
Example) 080 = 8 m
[Minimum bending radius]
Moving cable: 33 mm
Mounted cable: 22 mm
Wire Color Signal
Light blue
Pink
Light green
Orange
Gray
Signal Color Wire
1B/
Light blue
Light blue
Pink
Light green
Orange
Gray
1B/
Light blue
Note) “1B” indicates one black dot.
Controller end Actuator end (Front view)
* *** indicates the cable length (L). Up to 30 m can be specified.
Example) 080 = 8 m
[Minimum bending radius]
Moving cable: 58 mm
Mounted cable: 38 mm
Wire Color Signal
White/
Orange
Signal Color Wire
(Soldered)
Connect the shield to the hood with a clamp.
Ground and braided shield wires
(Crimped)
LS end
(Crimped)
White/
Green
Brown/
Blue
Brown/
Yellow
Brown/
Red
Brown/ Black
White/
Blue
White/
Yellow
White/
Red
White/
Black
White/
Purple
White/
Gray
Orange
Green
Purple
Gray
Red
Black
Blue
Yellow
White/
Orange
White/
Green
Brown/
Blue
Brown/
Yellow
Brown/
Red
Brown/
Black
White/
Blue
White/
Yellow
White/
Red
White/
Black
White/
Purple
White/
Gray
Ground
Orange
Green
Purple
Gray
Red
Black
Blue
Yellow
(“White/blue” in the wire color field indicates
a white band with a blue insulator band.)
Signal Color Wire