SecurityMan IPcam-SD - User manual - Manual (Page 88)

84
• • • •VIDEO BLIND
The
VIDEO BLIND sub-menu located in the “Alarm” menu option consists of
13 settings that are used to configure how the IPcam-SD will respond when
the its lens has become obstructed (blind). These settings are:
A. Channel – used to select which camera you want to configure.
B. Enable – enables/disables motion detection alerts.
C. Sensitivity (drop down) – used to adjust the motion detection
sensitivity level.
D. Schedule – used to setup a recording schedule.
E. Action Area – used to control what the IPcam-SD should do when
an event occurs.
F. PTZ Activation – enables motion activated tour and preset movement.
G. Notification Area – used to select how you want to be notified when
an event occurs.
H. Delay – post-Record time frame.
I. Copy – copies the current configuration settings.
J. Paste – pastes the configuration settings to the selected camera.
K. Refresh – restores any changes made.
L. OK – saves the changes.
M. Cancel – exits the menu without saving the changes.
I J K L M
H
A
B
C
D
E
F
G