SecurityMan IPcam-SD - User manual - Manual (Page 47)

43
• • • VIDEO BLIND
The VIDEO BLIND tab located on the Alarm Setting tab consists of 4 settings
that are used to configure how the CMS will operate whenever the cameras
image is interrupted/blocked (blind). These settings are:
NOTE: Please remember to click the “APPLY” button located at the bottom
of each tab to save your changes and click on the “ X” located at the top right
corner of the screen exit.
A. Device List – used to select which device you want to configure.
B. Video Blind Enable – enables the CMS to monitor video blind alerts.
C. Alarm Sound – enables/disables audible alert notification.
D. Sound File Path – used to specify the location of the sound file
you want to use.