SecurityMan ZT-809T - Manual

2.4GHz Mini Wireless Color Camera User's Guide (ZT-809T)
Thank you for purchasing 2.4GHz Mini Wireless Color Camera with built-in audio and 2.4GHz Video Transmitter.
The Camera converts the video and audio signals into radio signals and transmits them to the Receiver.
(Only works with ZT-707, ZT-705, or SM-734 Receivers)
1 x Wireless AV Camera (ZT-809T) 1 x Bracket
1 x 8V power adapter for Camera 1 x 9V Battery
1 x Focus Adjustment Tool 1 x Battery Clip
Setting up the Camera
1) Place the camera at desired location.
2) Plug the power adapter or battery clip jack into the power jack at the back of the camera.
3) Plug the power adapter to any DC outlet or plug a 9V battery to the battery clip.
4) Check the Camera Frequency number at the back of each camera. (The receiver will receive signal from
the camera’s corresponding frequency. For example, Channel 1 on the TV/Monitor will display the picture from
Camera 1 only).
Setting up the Receiver to match camera’s frequency
Press the Channel Switch button until the LED channel indicator light match to the camera’s frequency
(Camera frequency can be found at the back of the camera).
* Please refer to the receiver manual for more information
Adjust the camera’s focal length
Use the Focus Adjustment Tool to adjust the camera’s focal length to make the picture more clear.
Hardware Basics
Installation Diagram
Package Contents
SecurityMan ®
ADJU
ST FOCU
S
Antenna
1
ZT-809T CMOS
DC8V 2.4GHz
NTSC
Power Jack
Camera
Frequency
Holes for Focus
Adjustment Tool
Adjustable lens
Bracket
Focus
Adjustment
Tool
Camera Back
Camera
To Camera
Power Jack
9V Battery
Connector
(battery included)
Camera Receiver
Battery Clip
A/V Cable
TV/ Monitor/VCR/DVR
9V battery
or 8V AC
adapter
(ZT-707,
ZT-705, or
SM-734)
CH3 CH2 CH1 SET