SecurityMan IPcam-SD - User manual - Manual (Page 149)

145
6. The ‘Device Detail” screen [IMAGE #11] consist of the following configuration options:
• DeviceName – the device name does not need to match any specific setting and
is used solely to identify your camera from the applications Device
List screen. For example, if you are using the app to remotely monitor
2 x IPcam-SD (one at home and one at work), the device name for the
first camera could be “HOME” and the second camera could be “WORK”.
• Address – IP address of your IPCAM-SD or Router depending on whether you are
accessing your IPCAM-SD from within your network (home) or outside
your network (Router).
• Mobile Port – the port number you assigned to the IPCAM-SD
Default: 101
• User Name – the user name used to login to the IPCAM-SD
Default: admin
• Password – the password associated with the user name
Default: blank/no password
• MaxChannel – Select 1so that it matches the number of channels available on the
IPcam-SD.
5. Select “Device List” [IMAGE #9] and then select the “+” icon located at the
bottom left corner of the screen [IMAGE #10] to bring up the “Device Detail”
screen which will allow you to add your IPcam-SD to the list.