SecurityMan SM-3803 - Manual

Package Contents:
Specifications:
Easy Setup and Installation:
Solar Power Outdoor/Indoor Dummy Camera with LED
SM-3803 User Manual
• Dummy camera with solar and LED
• Mounting bracket and sun visor
• Weather resistant dummy camera with one flashing red LED
• Energy efficient built-in solar panel or 2xAAA backup standard/rechargeable
batteries (not included) when it is dark
• Adjustable wall-mount bracket
• Looks like real security camera
• 2 x Warning stickers
• Screws and accessories
Go green with SecurityMan (SM-3803) inexpensive solar dummy camera. Solar dummy camera can be
use to protect your home and business. It features energy saving designed solar panel capable of charging
rechargeable batteries and conserve/extend the battery life of standard batteries (2 x AAA required, battery
not included). The built –in solar panel will recycle indoor lights of 100+ Lux as power source or it will use
batteries power instead. Generally, two AAA batteries could last up to 1 1/2 year instead of one year.
Equipped with a flashing red LED light which enhances the presence of camera and security. Professional
designed to purposely deter unwanted intruders and solicitors with just a fraction of a cost of a real security
camera. Mix in with real cameras for more dynamic presence or use individually to increase security anywhere.
• Solar charges/conserves rechargeable/standard AAA batteries
• Low power consumption of 0.04W
• Camera dimension: 160 (L) x 80 (W) x 74 (H) mm (6.30”x3.15”x2.91”)
• N.W. 301g; G.W. 389g
1. The solar dummy camera is ready out of the box, if there is enough lighting in the room the LED light will light up every 6 seconds by the solar panel located on the
top of the sun visor. In this case batteries are not necessary, the camera can be mounted to a desire location with the screws provided for instant use.
2. Standard batteries or rechargeable batteries can be installed for backup purposes and charge rechargeable batteries respectively when lighted area gets dark.
To install battery for backup or use in dark area; locate the battery cover (black) at the rear of the camera and then turn the rear cover counter-clockwise to
loosen as shown in Picture 1 below.
Insert 2 x 1.5V AAA size batteries into the battery compartment as show above in Picture 2 (supports standard batteries or rechargeable batteries). After the
batteries are installed secure the battery compartment by placing the battery cover over the rear of the camera and then turn it clockwise to secure as
demonstrated in Picture 1 above. The red LED light should start to flash once every 6 seconds. Secure the camera with the screws provided and positions the
camera to the intended direction for surveillance as illustrated below.
Picture 1 Picture 2