SecurityMan IPcam-SD - User manual - Manual (Page 100)

96
• • • •ENCODE
The
ENCODE sub-menu located in the “System” menu option consists of 15 basic
settings that will allow you to adjust the IPcam-SD’s video quality settings. These
settings include:
NOTE: You can make changes to both “Extra Stream” and “Main Stream” individually.
A. Channel – system default to channel 1 and it cannot be change.
B. Compression – default to H.264 compression, not configurable.
C. Resolution – resolution configuration.
D. FPS – frames per second configuration.
E. Bit Rate Type – Constant or Variable Bit Rate selection.
F. Quality – lets you define the quality of the video being recorded
(only available when VBR is selected the Bit Rate Type).
G. Bit Rate (kb/s) – video bitrate configuration (only available when
CBR is selected the Bit Rate Type).
H. Frame Interval (sec) – is Intra Frame Interval set to stream only the
changes in frame for faster and smoother
video steaming.
I. Video/Audio – enables/disables video and audio.