SecurityMan IPcam-SD - User manual - Manual (Page 110)

NTP
The
NTP option allows configuration to update and automatically synchronize
the date and time using network time protocol in your local area networking.
To set up NTP, place a check mark to enable, input the server IP name/IP, the
server port number, initial time zone, and how periodically you want NTP to
update the date/time in minute. Click OK to confirm set up or click CANCEL to
cancel.
For example: you will need two computers, one computer to enable NTP
service and the second computer running CMS software.
1) To enable NTP service on computer #1 (or server PC), go to Control
panel>Administrative Tools>Services. Scroll to the bottom of services and
double click on “Windows Time”. In Windows Time, select “Automatic” in the
“Startup type:” section and finally click “Apply” and “OK” to save the setting as
shown below. Jot down the IP address of computer #1 to be inputted in to the
“Server IP” section of the NTP Netservice.
106
NOTE: Please check with your email provider for proper smtp server, port,
user name and password of your email account informations.