Securitron DK-12 User Manual
Page 5
PN# 500-24010
Page 5
Rev. C, 04/11
Setting/Changing Codes:
Enter program code on the keypad.
Press either ‘#’ or ‘’ and the yellow light will flash.
On the keypad enter either 0-0 (program code), 0-1 through 9-7
(user code), 9-8 (lockout code), or 9-9 (passage code).
Enter desired code on the keypad.
Press either ‘#’ or ‘’, or wait 5 seconds to complete entry.
The red light will flash twice to confirm a valid entry. If a single
flash occurs then there was an error; try the above steps again.
If the error still occurs read Section 8 (Subset Codes).
Press either ‘#’ or ‘’ to exit programming mode and the yellow
light will stop flashing.
Note: Program code length must be 5 to 7 digits long; all
others are 2 to 7 digits long.
Deleting a Code Via Slot Number:
Enter program code on the keypad.
Press either ‘#’ or ‘’ and the yellow light will flash.
Enter desired code slot on the keypad (0-0 to 9-9).
Enter #-# on the keypad to complete entry.
The red light will flash twice to confirm a valid entry. If a single
flash occurs then there was an error; try the above steps again.
Press either ‘#’ or ‘’ to exit programming mode and the yellow
light will stop flashing.
Deleting Via Known Code:
Enter program code on the keypad.
Press either ‘#’ or ‘’ and the yellow light will flash.
Enter 7-9- on the keypad.
Enter known code to be deleted on the keypad.
Enter #-# on the keypad to complete entry.
The red light will flash twice to confirm a valid entry. If a single
flash occurs then there was an error; try the above steps again.
Press either ‘#’ or ‘’ to exit programming mode and the yellow
light will stop flashing.
Deleting All User, Passage, and Lockout Codes:
Enter program code on the keypad.
Press either ‘#’ or ‘’ and the yellow light will flash.
Enter 8-8- on the keypad.
Enter #-# on the keypad to complete entry.
The red light will flash twice to confirm a valid entry. If a single
flash occurs then there was an error; try the above steps again.
Press either ‘#’ or ‘’ to exit programming mode and the yellow
light will stop flashing.
1
2
3
4
7
5
6
8
9
0
#
Yellow
Light
Red
Light
12 Dig
it K
eypad
1
2
3
4
7
5
6
8
9
0
#
Yellow
Light
Red
Light
12 Dig
it K
eypad
1
2
3
4
7
5
6
8
9
0
#
Yellow
Light
Red
Light
12 Dig
it K
eypad
1
2
3
4
7
5
6
8
9
0
#
Yellow
Light
Red
Light
12 Dig
it K
eypad