Securitron ASCWB-DM62CLM - Manual

Securitron Magnalock Corp. www.securitron.com
ASSA ABLOY, the global leader
Tel 800.624.5625 [email protected]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-22800
Page 1 Rev. C, 06/11
MODEL ASCWB-DM62CL & ASCWB-DM62CLM
ALUMINUM SPACER CONCRETE WOOD HEADER BRACKET
INSTALLATION INSTRUCTION GUIDE
1. PRODUCT DESCRIPTION
The ASCWB-DM62CL & ASCWB-DM62CLM are 1/2” [12.7mm] thick clear anodized aluminum
spacer brackets designed for adapting to frame installations with the Model DM62 Magnalock.
Installations that contain aluminum door frames with or without blade stops, wooden door
frames, steel frames and/or concrete filled header frames may require a special
spacer/structural type bracket. The purpose of the spacer bracket is to improve frame mounting
strength, Magnalock/Strike clearances, alignments and ease of the installation. Applying the
bracket, the DM62 Magnalock model becomes installable involving these frame types.
2. PRODUCT OVERVIEW
Upon unpacking this product, an inventory should be made to ensure that the required bracket
and hardware have been included. Along with these instructions, the kit should include the
items in the Figure 1 illustration below.
Figure 1
3. RECOMMENDED TOOLS
Power Drill Screwdriver: #2 or #3 Phillips 1/2” [13mm] Wrench or Adjustable
Center Punch 3/16” [5mm] Hex Wrench or 5mm 1/4” [6mm] Hex Wrench
Drill Bits: 3/16” [4.8mm], 7/32” [5.5mm] and 3/8” [9.5mm]
4. INSTALLATION INSTRUCTIONS
The instructions are divided into three (3) sections concerning all frame types. Details for
installing to the various frame types are mentioned further in this installation guide.
4.1 ALUMINUM DOOR AND FRAME MOUNTING
4.1.1 ALUMINUM DOOR STRIKE ARMATURE MOUNTING
Mounting the strikes to an aluminum frame door may vary depending on the top rail (shoe) size
and the internal structural design. When sex bolts are not adequate, a special blind nut may be
installed using the same technique detailed in the DM62 installation manual. Figure 2 below
illustrates the blind nut tool assembly before and after collapsing.
NOTE: OFFSET STRIKES MAY BE NECESSARY FOR FRAME STRUCTURE ALIGNMENT
Figure 2
Hardware Pack
Before (Collapsed) After
Aluminum Frame Face
(Not Included)
All Parts are Included Below
Star Washer 2X Flat Washer
Socket Head Cap Screw
Hex Nut
Special Blind Nut
ASCWB-DM62CL
Aluminum Spacer Bracket