Securitron TDK-1 User Manual

Securitron For Home

Securitron Magnalock Corp. www.securitron.com

ASSA ABLOY, the global leader

Tel 800.624.5625

in door opening solutions

MODEL: TDK-1 ~ THICK DOOR KIT ~ INSTALLATION INSTRUCTIONS

1. INTRODUCTION
The Securitron TDK-1 Thick Door Kit is designed to allow proper installation of the strike
armature for Magnalock Models ~ M32, M38, M62, M68 or M82 series on doors that are
greater than 1-7/8 inches in thickness. The TDK-1 thick door kit matrix below will allow
you to choose the proper screw length for the thickness of the door your installation
requires.

1. INTRODUCTION
The Securitron TDK-1 Thick Door Kit is designed to allow proper installation of the strike
armature for Magnalock Models ~ M32, M38, M62, M68 or M82 series on doors that are
greater than 1-7/8 inches in thickness. The TDK-1 thick door kit matrix below will allow
you to choose the proper screw length for the thickness of the door your installation
requires.

2. SPECIFICATIONS
Use for installations of Magnalock Models M32, M38, M62, M68 or M82 Series. The
screws provided meet RoHS Specifications available through Securitron Technical
Support.

3. PRODUCT

OVERVIEW

Upon unpacking this product, an inventory should be made to ensure that all the required
hardware has been included. Along with these Instructions this product should include
three (3) 5/16-18 flathead hex screws of 2”, 2-1/2” and 3” inch in length.

4. INSTALLATION

INSTRUCTIONS

Securitron TDK-1 thick door kit provides you the proper strike armature screw for the door
used in your installation. For proper installation of the strike assembly, refer to the
Magnalock Installation Manual.

OVERVIEW

INSTRUCTIONS

Door

Thickness

2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/4"

Screw Length

2" 2" 2-1/2"

2-1/2"

3" 3"