Securitron SMLS_SMSS User Manual

Securitron For Home

Securitron Magnalock Corp.

www.securitron.com

ASSA ABLOY, the global

leader

Tel

800.624.5625

[email protected]

in door opening solutions

PN# 500-12400

Page 1

Rev. D, 03/11

INSTALLATION INSTRUCTIONS FOR SMLS/SMSS

Surface Mount Lock Shear & Surface Mount Strike Shear

1. RECOMMENDED TOOLS
Drill Motor
Drill Bit: 3/8” [9.5mm]

Screwdrivers: Phillips and Standard
Measuring Tool (ruler or tape measure)
Hex (Allen) Wrenches: 1/8” (provided in Metric Hardware Pack), 5/32” [4mm] and 3/16”
Blind Nut Installation Tool

2. INSTALLATION INSTRUCTIONS
Magnalock Installation using SMLS/SMLSM
Figure 1 below is an exploded illustration of the general SAM lock mounting configuration
available using the hardware provided:

(6) 10-32 UNF X 3/8" LONG
FLAT HEAD SOCKET SCREWS
SUPPLIED WITH SAM LOCK OR
METRIC (SMLSM) VERSION OF
LOCK MOUNT

(REFERENCE) SAM LOCK
- NOT INCLUDED

Figure 1

Note: The items represented by the phantom/dashed lines are for reference only – the SAM
Magnalock and its associated hardware are NOT included with this product.

U.S. Standard:

ITEM QTY

DESCRIPTION

Lock/Strike Mounting Bracket

2 1

Lock/Strike

Bracket

Cover

1/4-20 UNC X 1” Long Socket Head Cap Screw

1/4-20 UNC Blind Nut, 1-Piece, Steel

Metric:

ITEM QTY

DESCRIPTION

Lock/Strike Mounting Bracket

2 1

Lock/Strike

Bracket

Cover

M6-1.0 X 25MM Long Button Head Socket Cap Screw

M6-1.0 Blind Nut, 1-Piece, Steel

10-32 UNF X 3/8” Long Flat Head Socket Screw

Hex Wrench, 1/8”