Securitron MCL-24 - Manual

Securitron Magnalock Corp. www.securitron.com
ASSA ABLOY, the global leader
Tel 800.624.5625 [email protected]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-19100
Page 1 Rev. C, 04/11
INSTALLATION AND OPERATING INSTRUCTIONS
FOR
Magnetic Cabinet Lock MCL-24
1. INTRODUCTION
Securitron’s model MCL-24 is a Magnetic Cabinet Lock designed to work with swing or sliding
cabinets and drawers. The assembly consists of the Magnalock Body, Universal Mounting Bracket
and Armature as well as the installation hardware. The MCL-24 Universal Mounting Bracket
allows the Magnalock Body or the Armature to be mounted in a wide variety of configurations
making it a snap to install just about anywhere.
2. SPECIFICATIONS
Holding Force: 200Lbs
(90
Kg)
Dimensions: 4.6” X .75” X 1.14”
(117 X 19 X 29mm)
Voltage: 24 Volts DC Only
Current Requirement: 62mA
Power Consumption: 1.5 Watts
3. PRODUCT OVERVIEW
Upon unpacking this product, an inventory should be made to ensure that all the required
components and hardware have been included. Along with these Instructions and the
Installation Template this product should include the following items:
(Note that a complete list of all included parts is provided in Section 5.2 of these instructions).
4. RECOMMENDED TOOLS
Drill Motor
Drill Bits:
13/64”, 1/8”, 3/32” and 1/4” (Optional)
Phillips and Standard Screw Driver
Measuring Tool (ruler or tape measure)
Wire Stripper
Crimping Tool
Digital or Analog Volt Ohm Meter (for diagnostics)
5/64” Hex (Allen) Wrench
5. INSTALLATION INSTRUCTIONS
5.1. Pre-Installation Survey/Assessment
Due to the wide variety of mounting configurations available for this product, it is strongly
recommended that an initial survey and assessment be made of the physical area to which
the Magnalock will be installed. A determination of the optimal method of mounting should be
made prior to installation with considerations made to the following:
Magnetic Cabinet Lock (MCL-24)
Universal Bracket
Strike Plate (MCL)
Hardware Pack