AMX G3 - Manual (Page 75)

Color Active-Matrix LCD Touch Panels Touch Panel Program Reference 67
communicating with the AXR-RF RF Receiver. Locked indicates the panel is
locked on to the AXR-RF connected to the control system.
• Battery Voltage XX.X Shows the voltage level of the lead-acid
rechargeable battery in the SMT-PK.
• AMX RF ON/OFF Toggles RF transmission on or off.
• Module Version VX.XX Shows the firmware version installed in the
SMT-PK.
• Fully Charged/Not Charging/Charging Fully Charged appears when
the battery in the SMT-PK is fully charged. Not Charging appears when the
lead-acid battery is not charging. Charging appears when the lead-acid
battery is charging. The shaded area in the horizontal gauge moves from left
to right as the battery voltage level increases.
• AMX IR 38 kHz/455 kHz/OFF Toggles the IR transmitting frequency to
38 kHz, 455 kHz, or OFF.
• Supply Voltage VX.XX Shows the voltage level of the external power
supply (optional) connected to the SMT-PK.
Protected Setup Page
The PROTECTED SETUP page allows you to set passwords, mouse controls, and
communications parameters. The flowchart in Figure 105 shows how to access the
PROTECTED SETUP page, which is password-protected. When you press the
PROTECTED SETUP button on the SETUP page, a number keypad appears.
SETUP
BUTTON
MAIN
PAGE
PROTECTED SETUP
BUTTON
TYPE
1988
Type
1988
, which is the system default password, and press ENTER to open the
PROTECTED SETUP page. (You can change the password, as explained in the
Setup password subsection.) If you enter a wrong number, press CLEAR and re-enter
the number. The PROTECTED SETUP page (Figure 106) appears when you enter
the correct number.
Figure 105
PROTECTED SETUP page
flowchart
Note
When the Edit bar is enabled,
you do not have to enter the
password when opening the
PROTECTED SETUP page.