AMX G3 - Manual (Page 73)

Color Active-Matrix LCD Touch Panels Touch Panel Program Reference 65
• Wave-Pak Not Locked/Locked Appears when an optional WAV-PK is
connected to the Touch Panel. Not locked indicates the Touch Panel is not
communicating with the AXR-WAVES. Locked indicates the Touch Panel is
locked on (communicating) to the AXR-WAVES connected to the control
system.
• Battery Voltage XX.X Shows the voltage level of the lead-acid
rechargeable battery in the WAV-PK.
• Device Range Shows the device range that your server can recognize.
Devices outside that range will not be recognized
• • Server Devices XXX Shows the group address on the AXR-WAVES
communicating with the Touch Panel.
• Module Version VX.XX Shows the firmware version installed in the
WAV-PK.
• • Fully Charged/Not Charging / Charging Fully Charged appears when
the battery in the WAV-PK is fully charged. Not Charging appears when the
lead-acid battery is not charging. Charging appears when the lead-acid
battery is charging. The shaded area in the horizontal gauge button moves
from left to right as the battery voltage level increases.
• • RSSI XXX% Shows the strength of the AXR-WAVES signal received by the
Touch Panel. The signal strength fluctuates between 50% and 100%.
• Server Version Shows the firmware version installed in the AXR-
WAVES.
• • Supply Voltage VX.XX Shows the voltage level of the external power
supply (optional) connected to the WAV-PK.
• Device Eff. XXX% Shows the strength of the AXR-WAVES signal
received by the Touch Panel. The shaded area in the horizontal gauge moves
from left-to-right as the RF signal intensity increases. The shaded area
fluctuates between 50% and 100%.