AMX G3 - Manual (Page 70)

62 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
• • HOUR Press the UP and DN buttons to set the hour.
• • MONTH Press the UP and DN buttons to set the month.
• • MIN Press the UP and DN buttons to set the minute.
• • DAY Press the UP and DN buttons to set the day.
• • SECOND Press the UP and DN buttons to set the seconds.
• DISPLAY MONTH/DAY, DAY/MONTH Press to set the month and day
display.
• DISPLAY 12:00/24:00 Press to set the clock display to a 12- or 24-hour
format. For example, the 12-hour clock format changes from 12:00 to 1:00,
and the 24-hour clock changes from 12:00 to 13:00.
Double beep
Press the DOUBLE BEEP button (Figure 100) to toggle the double beep option on or
off. The double beep sounds when you press the screen.
Set the BEEP button (described earlier) to 0 to disable the double-beep sound.
AXlink, serial number, and vX.XX
The AXlink, SERIAL #, and vX.XX buttons shown in Figure 101 are information
buttons (display only).
The AXlink button is an AXCESS communication indicator that blinks once every
second when the AXCESS Central Controller is connected to the Touch Panel. The
Figure 100
DOUBLE BEEP button
Note
You can override the beep
value setting using the
' ABEEP ' and ' ADBEEP '
Send_Commands described
in the AXCESS Programming
section.
Figure 101
AXlink, SERIAL #, and vX.XX
button examples