AMX G3 - Manual (Page 114)

106 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels
• BUTTON OPTIONS Opens the BUTTON OPTION menu (Figure 171)
where you set the button type. Press ABORT to close the menu.
— BARGRAPH DISPLAY Sets the bargraph as a vertical indicator for
external devices. Indicator levels are defined in the AXCESS software
program.
— BARGRAPH ACTIVE Sets the bargraph as a vertical controller for
external devices. Indicator levels are defined in the AXCESS software
program. When a control level is set on the vertical graph, control data is
sent to the control system to control an external device.
— BARGRAPH CENTERING Sets the bargraph as a vertical controller with
a default control level. Levels are defined in the AXCESS software
program. When a control level change is sent to the control system, the
external device changes accordingly until the control data input stops.
Then the control level on the vertical graph returns to the default position
and the external device returns to a default control position.
— SLIDER DISPLAY Sets the slider as a horizontal status indicator for
external devices. Levels are defined in the AXCESS software program.
— SLIDER ACTIVE Sets the slider as a controller for external devices.
Control levels are defined in the AXCESS software program. When a
control level is set on the horizontal graph, control data is sent to the
control system to control an external device.
Figure 177
BUTTON OPTION menu