beautypg.com

Teledyne BDS-3000 - Oxygen analyzer User Manual

Page 85

background image

Oxygen Analyzer

Maintenance

Teledyne Analytical Instruments

71

situation, uninstall the sensor and take off the cap carefully, then
apply a vacuum degas process as shown in the Figure 5-5.
Degassing in a 28 inch mercury vacuum for 5 minutes is
sufficient to remove the gas bubbles. Reinstall the sensor into the
analyzer.

Note: A low cost vacuum degas kit (TAI P/N B72098) is available

from Teledyne Analytical Instruments.

Figure 5-5: Vacuum Degassing for the BDS Oxygen Sensor