PROLiNK WNR1004 Wireless-N User manual - Manual (Page 7)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
4
2.3 Gateway Mode
When Gateway (GW) mode is selected, the device will enter gateway mode. And the wireless
connection will be set up from a point-to-point local LAN into a point-to-multipoint WAN.
2.4 Client Mode
If set to Client (Infrastructure) mode, a device connects to each other through an access point or a
base station (gateway or router.) This device can work like a wireless station when it’s connected to
a computer directly, so that the computer can send packets from wired end to wireless interface.