PROLiNK WNR1004 Wireless-N User manual - Manual (Page 30)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
27
c) WPA/WPA2/WPA1 WPA2
WPA Algorithms Select the type of algorithm, TKIP or AES for WPA, and TKIP, AES or TKIP AES for
WPA2, WPA1/WPA2.
Key Renewal
Interval Enter the renewal security time (seconds) in the column. Default is 3600 seconds. Set
0 to disable re-key.
RADIUS Server RADIUS is an authentication, authorization and accounting client-server protocol.
The client is a Network Access Server that desires to authenticate its links. The server
is a server that has access to a user database with authentication information.
IP Address Enter the RADIUS Server’s IP Address provided by your ISP.
Port Enter the RADIUS Server’s port number provided by your ISP. (The default is 1812.)
Shared Secret Enter the password that the Wireless Portable Router shares with the RADIUS Server.
Session Timeout Session timeout interval is for 802.1x re-authentication setting. Set to zero to disable
802.1x re-authentication service for each session. Session timeout interval unit is
second and must be larger than 60.
Idle Timeout Enter the idle timeout in the column.
PMK Cache Period Only valid in WPA2 security. Set WPA2 PMKID cache timeout period, after time out,
the cached key will be deleted. PMK Cache Period unit is minute.
Pre-Authentication Only valid in WPA2 security. The most important features beyond WPA to become
standardized through 802.11i/WPA2 are pre-authentication, which enables secure
fast roaming without noticeable signal latency.