PROLiNK WNR1004 Wireless-N User manual - Manual (Page 25)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
22
Broadcast Network Name(SSID) Enable: This wireless AP will broadcast its SSID to stations.
Disable: This wireless AP will not broadcast its SSID to stations. If
stations want to connect to this wireless AP, this AP’s SSID should be
known in advance to make a connection.
AP Isolation Select Enable or Disable to enable this function.
MBSSID AP Isolation Select Enable or Disable to enable this function.
BSSID Shows the MAC address of the Wireless Portable Router.
Frequency (Channel) Select 1~11 or Auto Select from the pull-down menu.
HT Physical Mode
Operating Mode Green Field (11n mode), Mixed Mode(11b/g/n mode). Select Mixed Mode
or Green Field. (Default operating mode is Mixed Mode.)
Channel Band Width Select 20 or 20/40. (Default setting is 20/40.)
Guard Interval Select Long or Auto. (Default setting is Auto.)
MCS Select form the pull-down menu 0~15, 32 or Auto. (Default setting is
Auto.)
Reverse Direction Grant(RDG) Select Disable or Enable this function. (Default setting is Enable.)
Extension Channel
You can select 2457MHz (Channel 10) or 2417MHz (Channel 2) form the
pull-down menu.
Aggregation MSDU (A-MSDU) Select Disable or Enable. (Default setting is Disable.)
Auto Block ACK
Select Disable or Enable. (Default setting is Enable.)
Decline BA Request Select Disable or Enable. (Default setting is Disable.)
Other
HT Tx Stream Select 1 or 2 form the pull-down menu.
HT Rx Stream Select 1 or 2 form the pull-down menu.
Apply Click to save and apply the current settings.
Cancel Click to discard the current settings.