PROLiNK WNR1004 Wireless-N User manual User Manual
Page 54
PROLiNK® WNR1004 User Manual
www.prolink2u.com
Revision 1.0 (Apr’09)
51
4.2.3 Checking TCP/IP Settings - Windows XP
1.
Select Control Panel - Network Connection.
2.
Right click the Local Area Connection and choose Properties. You should see a screen like
the following:
3.
Select the TCP/IP protocol for your network card.
4.
Click on the Properties button. You should then see a screen like the following.
5.
Ensure your TCP/IP settings are correct.
4.2.3.1
Using DHCP
•
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting. Using this is recommended. By default, the Wireless Portable Router will act as a DHCP
Server.
•
Restart your PC to ensure it obtains an IP Address from the Wireless Portable Router.
•
Using a fixed IP Address ("Use the following IP Address")
•
If your PC is already configured, check with your network administrator before making the following
changes.
•
In the Default gateway field, enter the Wireless Portable Router 's IP address and click OK. Your LAN
administrator can advise you of the IP Address they assigned to the Wireless Portable Router.