PROLiNK WNR1004 Wireless-N User manual User Manual

Page 41

PROLiNK® WNR1004 User Manual

www.prolink2u.com

Revision 1.0 (Apr’09)

3.5.2.5

Station Advanced Configurations

Wireless Mode (Infra)

Select 802.11 B/G/N mixed mode, 802.11B only, 802.11G only, 802.11N only, 802.11
G/N mixed mode, or 802.11 B/G mixed mode from the pull-down menu. (Default is
802.11 B/G/N mixed mode.)

B/G Protection

Select Auto, On or Off from the pull-down menu.

Tx Rate

Select preferred Tx rate form the pull-down list.

Tx Burst

Check the box to enable the Tx Burst function. (Default Tx Burst setting is Enable.)

Select MM or GF. Default setting is MM.

Channel Band Width. Select 20 or Auto. (Default setting is Auto.)

Guard Interval. Select Long or Auto. (Default setting is Auto.)

MCS

Select form the pull-down menu 0~15, 32 or Auto. (Default setting is Auto.)

RADIO OFF

Click this button to turn on or off the wireless function.

3.5.2.6

Station QoS

WMM

Check the box to enable or disable the WMM function. (Default setting is Enable.)

WMM Power Saving

Check the box to enable this function. (Default setting is Disable.)

PS Mode

Select preferred power save mode, AC_BE, AC_BK, AC_VI, AC_VO.