PROLiNK WNR1004 Wireless-N User manual - Manual (Page 53)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
50
2. Right - click the Local Area Connection icon and select Properties. You should see a screen like
the following:
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
5. Ensure your TCP/IP settings are correct, as described below.
4.2.2.1 Using DHCP
• To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting. Using this is recommended. By default, the Wireless Portable Router will act as a DHCP
Server.
• Restart your PC to ensure it obtains an IP Address from the Wireless Portable Router.
4.2.2.2 Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
• Enter the Wireless Portable Router 's IP address in the Default gateway field and click OK. (Your LAN
administrator can advise you of the IP Address they assigned to the Wireless Portable Router.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and enters the
DNS address or addresses provided by your ISP, then click OK.