PROLiNK WNR1004 Wireless-N User manual - Manual (Page 32)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
29
3.5.1.4 Wireless Distribution System
Select the mode from the pull-down menu, Disable, Lazy Mode, Bridge Mode or Repeater Mode. (Default
WDS mode is Disable.)
If the users would like to set up the WDS function, please go to Wireless settings> Basic to set up APs that
should use the same SSID and Channel , then go back to Wireless settings> WDS to enter Wireless MAC of
each other to make the WDS connection.
Step 1: Setup the same SSID and Channel on both wireless APs.
Step 2: Enter Wireless MAC address to each other (according to the WDS mode that user selected).