PROLiNK WNR1004 Wireless-N User manual - Manual (Page 45)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
42
3.6.2 Port Forwarding
Virtual Server Settings Select Enable or Disable from the pull-down menu.
IP Address Enter the local server’s IP address.
Port Range For TCP and UDP services enter the beginning of the range of port numbers used
by the service. If the service uses a single port number, enter it in both the start
and finish fields.
Protocol Select the protocol (TCP, UDP or TCP&UDP) used to the remote system or
service.
Comment You may key in a description for the IP address.
3.6.3 DMZ
DMZ Settings If the DMZ Host Function is enabled, it means that you set up DMZ host at a particular
computer to be exposed to the Internet so that some applications/software, especially
Internet / online game can have two-way connections. Select Enable or Disable from the
pull-down menu.
DMZ IP Address Enter the IP address of a particular host in your LAN that will receive all the packets
originally going to the WAN port/ Public IP address above.
Note: You need to give your LAN PC clients a fixed/ static IP address for DMZ to work
properly.
Apply Click to save and apply the current settings.
Reset Press to discard current settings.