PROLiNK WNR1004 Wireless-N User manual - Manual (Page 28)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
25
Multicast-to-Unicast Converter
Multicast-to-Unicast Select Disable or Enable this function. (Default setting is Disable.)
3.5.1.3 Wireless Security/Encryption Settings
Security Mode
There are eleven type of authentication modes including Disable, Open, Shared, WEP Auto, WPA, WPA-
PSK, WPA2, WPA2-PSK, WPA-PSK/ WPA2-PSK, WPA/WPA2 and 802.1X. The security default setting is
Disable.
Note:
• WPA and WPA-PAK only support TKIP and AES as encryption method.
• SHARED only supports WEP as encryption method.
• WEP AUTO means AP can accept STA connect to it using OPEN-WEP or SHARED-WEP.