PROLiNK WNR1004 Wireless-N User manual - Manual (Page 31)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
28
d) WPA-PSK/WPA2-PSK/WPA-PSK WPA2-PSK
WPA Algorithms Select the type of algorithm, TKIP or AES for WP-PSK, and TKIP, AES or TKIP AES for
WPA2-PSK, WPA1 PSK WPA2 PSK.
Pass Phrase Enter the pass phrase 8~63 ASCII or 64 HEX characters in the column.
Key Renewal Interval Enter the renewal security time (seconds) in the column. Default is 3600 seconds.
Set 0 to disable re-key.
e) 802.1x
WEP Select Disable or Enable to this function.
RADIUS Server RADIUS is an authentication, authorization and accounting client-server protocol. The
client is a Network Access Server that desires to authenticate its links. The server is a
server that has access to a user database with authentication information.
IP Address Enter the RADIUS Server’s IP Address provided by your ISP.
Port Enter the RADIUS Server’s port number provided by your ISP. (The default is 1812.)
Shared Secret Enter the password that the Wireless Portable Router shares with the RADIUS Server.
Session Timeout Session timeout interval is for 802.1x re-authentication setting. Set to zero to disable
802.1x re-authentication service for each session. Session timeout interval unit is second
and must be larger than 60.
Idle Timeout Enter the idle timeout in the column.
Access Policy
Policy Set access control policy of the stations. Select Disable, Allow or Reject form the pull-
down menu.
Add a station Mac Enter a station MAC in the blank field.