Diamond Products SK-B - Manual (Page 8)

6DIHW\ LQVWUXFWLRQV
Wire sawing system
6.%
page 8 SK-B_0008_e.mif
hole. If necessary, the cut location must be
shifted after consulting the customer.
Organize your working place
Organize your working place well! You will
reduce the risk of accidents substantially!
Lighting of your workplace
Make sure you have sufficient lighting at your
working place.
Safe areas for operating personnel and
other people
This machine is designed to be operated by a
single person.
During machining, other people must keep a
safe distance from the machine.
The power unit must be positioned so that all
controls can be easily reached by the operator.
It must in particular be possible to stop the
machine quickly and reliably (also refer to the
section "Emergency stop" in the operating
manual of the power unit employed.).
Motor feed
Machines with motor-driven feed are not
automatic machines. They must never be left
unattended during operation. An emergency
stop must be possible at all times.
Rotating and moving parts
To prevent being caught by rotating or moving
parts, wear close-fitting clothes and a hair-net
if you have long hair!
1.5 After work
Unplug mains
Unplug the mains connector of the power unit
employed after completing work in order to
prevent accidental activation!
Removing cut outs and drilling cores
Use appropriate lifting gear to remove these
pieces, in order to prevent injuries!