Atlantis Land Compact Router ADSL A02-RA110 - Manual (Page 72)

COMPACT ROUTER ADSL
A02-RA110 Pag. 64
CHAPTER 11: Remote Management
Configuration
This chapter provides information on configuring remote management. Remote
management is not available on all models
11.1 Remote Management Overview
Remote management allows you to determine which services/protocols can
access which ADSL Router interface (if any) from which computers.
You may manage the ADSL Router from a remote location via:
Internet (WAN only) ALL (LAN and WAN)
LAN only Neither (Disable)
To disable remote management of a service, select Disable in the corresponding
Server Access field.
11.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
A filter is applied to block a Telnet, FTP or Web service.
You have disabled that service in one of the remote management screens.
The IP address in the Secured Client IP field does not match the client IP
address. If it does not
There is an console session running.
There is already another remote management session of the same type (web,
FTP or Telnet) running. You may only have one remote management session
of the same type running at one time.
There is a web remote management session running with a Telnet session. A
Telnet session will be disconnected if you begin a web session; it will not
begin if there already is a web session.
11.1.2 Remote Management and NAT
When NAT is enabled:
Use the ADSL Router’s WAN IP address when configuring from the WAN.
Use the ADSL Router’s LAN IP address when configuring from the LAN.