Atlantis Land Compact Router ADSL A02-RA110 - Manual (Page 22)

COMPACT ROUTER ADSL
A02-RA110 Pag. 14
3.3 Factory Default Settings
Before configurating this ADSL Router, you need to know the following default
settings.
• Username: admin
• Password : atlantis
• IP Address : 192.168.1.254
• Subnet Mask : 255.255.255.0
• DHCP server is enabled.
• WAN=Routing, PPPoA, VC-Mux, VPI=8, VCI=35
3.3.1 Username and Password
The default username and password are admin and atlantis respectively.
If you ever forget the password to log in, you may press the RESET
button (6 seconds or above) to restore the factory default settings..
3.3.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default
values are shown below.
LAN Port
WAN Port
IP Address 192.168.1.254
Subnet Mask 255.255.255.0
DHCP From 192.168.1.100 to
192.168.1.199
Mode=Routing
Encapsulation=PPPoA
Multiplex=VC
VPI=8
VCI=35
3.4 Information from the ISP
Before configuring this device, you have to check with your ISP (Internet Service
Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483,
IpoA.