Atlantis Land Compact Router ADSL A02-RA110 - Manual (Page 47)

COMPACT ROUTER ADSL
A02-RA110 Pag. 39
in this case.
When DHCP is used, the following items need to be set:
LAN Subnet
Mask Enter a subnet mask in dotted decimal notation.
Client IP Pool
Starting
Address This field specifies the first of the contiguous addresses in the
IP address pool.
Size of Client IP
Pool This field specifies the size or count of the IP address pool.
Primary DNS
Server Enter the IP addresses of the DNS servers. The DNS servers
are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS
Server As above.
Remote DHCP
Server If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
TCP/IP
IP Address Enter the IP address of the ADSL Router in dotted decimal
notation, for example, 192.168.1.254 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
Select the RIP direction from None, Both, In Only and Out
Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a multicast group.
The ADSL Router supports both IGMP version 1 (IGMP-v1)
and IGMP-v2. Select None to disable it.
Apply Click this button to save these settings back to the ADSL
Router.
Cancel Click this button to reset the fields in this screen.