Atlantis Land Compact Router ADSL A02-RA110 - Manual (Page 38)

COMPACT ROUTER ADSL
A02-RA110 Pag. 30
Address and type your ISP assigned IP address in the IP
Address text box below
Connection Select Connect on Demand when you don't want the
connection up all the time and specify an idle time-out (in
seconds) in the Max. Idle Timeout field. The default setting
selects Connection on Demand with 0 as the idle time-out,
which means the Internet session will not timeout
Select Nailed-Up Connection when you want your connection
up all the time. The ADSL Router will try to bring up the
connection automatically if it is disconnected.
Network
Address
Translation This option is available if you select Routing in the Mode field.
Select None, SUA Only or Full Feature from the drop-sown list
box. Refer to the NAT chapter for more details.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.
4.11 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the ADSL Router as a DHCP server or disable it. When configured as a
server, the ADSL Router provides the TCP/IP configuration for the clients. If you
turn DHCP service off, you must have another DHCP server on your LAN, or else
the computer must be manually configured.
4.11.1 IP Pool Setup
The ADSL Router is pre-configured with a pool of 32 IP addresses starting from
192.168.1.33 to 192.168.1.64 for the client machines. This leaves 31 IP
addresses, 192.168.1.2 to 192.168.1.32 (excluding the ADSL Router itself which
has a default IP of 192.168.1.254) for other server machines, for example, server
for mail, FTP, telnet, web, etc., that you may have.
4.12 Wizard Setup Configuration: Third Screen
Verify the settings in the screen shown next. To change the LAN information on
the ADSL Router, click Change LAN Configurations. Otherwise click Save
Settings to save the configuration and skip to section 3.13.