Liquid Controls HML110 IOM - Manual (Page 20)

HML 110
20
110_EN_LC_5_3_6X.doc
6.1* Output 1 functions (function info & modification page 25)
6.2* Output 2 functions (function info & modification page 25)
6.3* Duty cycle value for pulses/frequency output (Info & modification page 26)
6.4* Choice of function the range of current output n.1 (Info & modification page 26)
8.1 Choice of the language: EN= English, IT=Italian, FR= French, SP= Spanish
8.2 Display update frequency: 1-2-5-10 Hz
8.3 Display contrast
8.4 Quick start menu visualization
8.5* Enable the change value of the totalises (info & modification page 27)
8.7* Total direct (positive) flow totalise reset (info & modification page 27)
8.8* Partial direct (positive) flow totalise reset (info & modification page 27)
8.6 Enable the page of net totalizer
8.13*Value of conversion/currency for direct totalizer (info & modification page 27)
8.9* Total reverse (negative) flow totalise reset (info & modification page 27)
8.10*Partial reverse (negative) flow totalise reset (info & modification page 27)
8.12 Choice of the numbers of decimals for the visualization currency value: From 0 to 3
8.11 Visualizes the values of the partial totalise in the unit of selected currency
8.14*Value of conversion/currency for reverse totalizer (info & modification page 27)
5.1* Total direct (positive) flow totalise reset enable
5.2* Partial direct (positive) flow totalise reset enable
5.3* Total reverse (negative) flow totalise reset enable
5.4* Partial reverse (negative) flow totalise reset enable
5.6 Totalise counting lock command (see page 10)
5.7* Autozero calibration external command
5.9 Range change external command
7.1 Choice of the communication protocol for the IF2 device
7.3 Speed of the RS485 output (possible choices: 2400, 9600, 19200, 38400 bps)
7.4 *********************
7.2 Address value of converter (range 0 - 255)