Liquid Controls XL LED Display E1615_E1616_E1617_E1618 - Manual (Page 4)

overvIeW
General Information
This manual provides instructions for the installation, operation, and maintenance of the LectroCount XL LED Remote
Display. LectroCount XL LED Remote Displays display the volume of metered product in a six-digit configuration of
high-intensity LED lights. The 2¼" high digits are viewable at up to 250 feet from the display.
features
• 6-digit, high-intensity LED display with 2¼" high display characters
• 30', 4-wire, shielded cable
• Weatherproof NEMA 4X enclosure
• Viewable from up to 250 feet
Model nuMbers & devIce coMPatIbIlIty
The four models of the LectroCount XL LED Remote Display are compatible with all current and legacy LectroCount
registers, solid state quadrature pulsers, solid state single channel pulsers, and the LCMag™ HML210 converter.
Lectrocount XL LeD remote DispLay compatibiLity
E1615 LectroCount LCR ® 600 and LectroCount LCR-II
E1616 LectroCount LCR, LectroCount 3
E1616 Quadrature pulsers (solid state and calibrated)
E1616 LCMag HML210 and single channel pulsers (solid state and calibrated)
Prior to installation, make sure that the model number of
the LectroCount XL LED Remote Display is compatible
with the intended device. If the display model is not
compatible, the display will not work and damage could
occur when power is applied.
To ensure that the LectroCount XL LED Remote Display
with the intended, check the model number printed on
the display’s serial number tag. The serial number tag
can be found on the top of display.
Models E1615, E1616, E1617, E1618 of the LectroCount XL LED Remote Display render LectroCount LCD Remote
Display models E1610, E1611, E1612, and E1613 obsolete.
reMote dIsPlay label
Each shipment of the LectroCount XL LED Remote Display
includes a set of four (4) additional unit of display labels. At
the factory, all displays are assembled with the “Gallons”
label. To change the “Gallons” label designation, simply
remove the desired unit of display label from the backing
and place it over the “Gallons” label.
check each shIPMent
Before installation, check your shipment against the packing list and ensure that no parts are missing. The packing list
is include in the same red information packet as this manual.
Remote Display Serial Number Tag
4