Liquid Controls XL LED Display E1615_E1616_E1617_E1618 - Manual (Page 3)

safety Procedures
! WarnInG
North America - Installations must be in full accordance with the National Electrical Code (US) or the Canadian
Electrical Code respectively to maintain the hazardous location ratings on the product.
WARNING: Explosion Hazard -
Substitution of components may impair suitability for hazardous area applications.
WARNING: Explosion Hazard -
When in hazardous locations, turn power OFF before replacing or wiring modules.
WARNING: Explosion Hazard -
Do NOT disconnect equipment unless power has been switched OFF or the area is known to be Non-Hazardous.
observe national and
local codes
! WarnInG
be Prepared
• Before using this product, read and understand the instructions.
• All work must be performed by qualified personnel trained in the proper application, installation, and
maintenance of equipment and/or systems in accordance with all applicable codes and ordinances.
• When handling electronic components and boards, always use proper Electrostatic Discharge (ESD)
equipment and follow the proper procedures
• Make sure that all necessary safety precautions have been taken.
• Provide for proper ventilation, temperature control, fire prevention, evacuation, and fire management.
• Provide easy access to the appropriate fire extinguishers for your product.
• Consult with your local fire department, state, and local codes to ensure adequate preparation.
• Read this manual as well as all the literature provided in your owner’s packet.
• Save these instructions for future reference.
• Failure to follow the instructions set forth in this publication could result in property damage, personal injury,
or death from fire and/or explosion, or other hazards that may be associated with this type of equipment.
Before disassembly of any meter or accessory component:
• All internal pressures must be relieved and all liquid drained from the system in
accordance with all applicable procedures.
• Pressure must be 0 (zero) psi.
• Close all liquid and vapor lines between the meter and liquid source.
Failure to follow this warning could result in property damage, personal injury, or death from
fire and/or explosion, or other hazards that may be associated with this type of equipment.
! WarnInG
be Prepared Safely Evacuate
Piping System
3