Liquid Controls DMS i1000 EZConnect Operators - Manual (Page 30)

30
Machine status
The Machine Status screens display information
regarding system status. There are two Machine Status
screens. The Status (F3) key on the Fill Vehicles
screen opens the Machine Status (1/2) screen. From the
Machine Status (2/2) screen, you can open the Printer
Status, Delivery Status, and Delivery Code screens.
These screens display the current conditions of the
FleetConnect system. These status screens are helpful
for troubleshooting and maintenance purposes. For
more information, see manual EM200-11.
Security: Display Only
A description of the active security level.
Idle • Unlocked Idle • Delivery Paused
• Delivery Active • W&M Idle • Factory
Idle
Switch: Display Only
The position of the selector switch.
Run • Stop • Print • Shift Print •
Calibrate
State: Display Only
The current processing activity of the LCR 600.
Run • Stop • End Delivery • Auxiliary •
Shift • Calibrate • Waiting for No-Flow
• Unknown
Printing? Display Only
Is the printer currently printing?
Other Errors? Display Only
Are there any other errors being reported by the
LCR?
Printer Status
Select this field to open the Printer Status screen..
Delivery Status
Select this field to open the Delivery Status screen.
Delivery Code
Select this field to open the Delivery Code screen.
Next (F1) opens Machine Status (2/2)
Diag (F3) opens list box to print a diagnostic ticket
LCR# (F4) opens list box to switch to another active LCR
Exit (F5) opens Fill Vehicles screen
Prev(F2) opens Machine Status (1/2)
Diag (F3) opens list box to print a diagnostic ticket
LCR# (F4) opens list box to switch to another active LCR
operaTIon