Liquid Controls DMS i1000 EZConnect Operators - Manual (Page 20)

20
operaTIon
fill vehicles (fuel delivery)
Fill Vehicles is the lap pad screen from which fuelers can
activate fuel deliveries. It appears on the lap pad display
immediately after logging on. When the EZConnect
reads an RFID button, the button ID, product type,
delivery quantities, and account information will appear
on in the Fill Vehicles screen. They will remain on the
screen until the EZConnect is removed from the button.
To make a delivery:
1. Attach the EZConnect button reader onto the RFID
button.
2. Press the power button on the EZConnect.
3. Open the nozzle and deliver the fuel
3. Remove the button reader from the RFID button to
deactivate the delivery.
When the delivery is completed, the roll printer prints the
transaction information, the DMS i1000 FleetConnect
records the delivery information into the FleetConnect
database, and the Fill Vehicles screen displays the
Waiting to start a new LCR delivery.
message.
fIll vehICles MessaGes
There are certain conditions in which FleetConnect can
not or will not permit a delivery. FleetConnect will display
a message at the bottom of the DMS i1000 screen when
a delivery is prohibited. These include:
No button ID is being read.
The EZConnect button reader is not reading a RFID
button.
Unkown button ID.
The button ID is not in the FleetConnect database.
The customer record for the button does
not exist.
The customer record assigned to the button is not in
the FleetConnect database.
If the button reader is pulled from the button, a ten second
window exists in which the button reader must be reattached
to continue the delivery on the same transaction record. This
feature is active only in the By Vehicle setting of the New
LCR Delivery: field in System Definitions.
Status (F3) opens Machine Status (1/2) screen
Misc (F4) opens Fill Vehicles Miscellaneous Commands list
Status (F3) opens Machine Status (1/2) screen
Misc (F4) opens Fill Vehicles Miscellaneous Commands list
FleetConnect can be set to save delivery files to the
USB device automatically. In the System Definitions
File, set the Transaction Target to “USB”. See page 28.
The vehicle record for the button does
not exist.
The vehicle record assigned to the button is not in the
FleetConnect database.
Vehicle xxxxxx does not have an assigned
product code.
A product code has not been specified for the vehicle
The Distallate product type is not
available on the truck.
The LCR(s) on the truck are not calibrated to deliver the
product type.
The LCR Red switch must be in the RUN
position before a new delivery can be
started.
The selector switch on the LectroCount LCR register(s) is
not in the RUN position. Fuel can not be delivered.