Impulse 463E - Manual (Page 16)

© Sealevel Systems, Inc. - 13 - SeaI/O User Manual
For high-current, high-voltage applications:
IDC 50 to IDC 50 Pin Ribbon Cable (Item# CA167)
− 40” cable connects the SeaI/O-463 to solid-state relay racks equipped with
50-pin header interface.
IDC 50 to IDC 50 Pin Ribbon Cable (Item# CA135)
− 40” cable connects the SeaI/O-463 to solid-state relay racks equipped with
50-pin edge connector.
Solid-State Relay Racks:
• Quad six position relay rack (Item# PB24HQ)
− Relay rack can accept up to six QSSRs for a total of 24 channels.
Features a 50-pin header connector for easy interface via 50-
conductor ribbon cables.
• Quad four position relay rack (Item# PB16HQ)
− Relay rack can accept up to four QSSRs for a total of 16 channels.
Features a 50-pin header connector for easy interface via 50-
conductor ribbon cables.
Quad Solid-State Relay Modules:
• AC Input (Item# IA5Q) – Provides 4 channels of discrete I/O interface to
monitor AC inputs up to 140V @ 10mA.
• DC Input (Item# IB5Q) – Provides 4 channels of discrete I/O interface to
monitor DC inputs from 3.3V to 32V.
• AC Output (Item# OA5Q) – Provides 4 channels of discrete I/O interface to
control AC outputs up to 140V @ 3A.
• DC Output (Item# OB5Q) – Provides 4 channels of discrete I/O interface to
control DC outputs up to 60V @ 3A.
Simulation/debug module (Item# TA01)
− Module simulates the operation and load characteristics of a standard 24-
channel relay rack. An LED corresponding to each port bit illuminates to
indicate state. Eight position DIP-switches are used to generate input status
changes.