Controlled Products Systems Group 1602-090 - Manual (Page 5)

1601-065-L-3-13 3
1602 SPECIFICATIONS
3-Piece 20 Ft. Wood Arms Only P/N 1602-340
3-Piece 20 Ft. Wood Arms Mounting Kit P/N 1602-041
Foam Padding for 14 Ft. Arm P/N 1601-260
3-Piece 20 Ft. Aluminum Arm Kit P/N 1602-162
3-Piece 24 Ft. Aluminum Arm Kit P/N 1602-164
3-Piece 27 Ft. Aluminum Arm Kit P/N 1602-166
(All hardware included in kits)
Foam Padding for 14 Ft. Arm P/N 1601-260
1602 Barrier Arm Kit Options
1602 Housing
Drawings not to scale
Class of Operation
Model 1602 - UL 325 Class III, IV – ETL Listed
Type of Gate
Wide Traffic Lane Vehicular Barrier Gate Only
Arm Types
Wood/Aluminum 3-piece counter-balanced assembly
Gate Cycles
Low Cycle
Primary Entrapment Protection
Inherent entrapment sensing system (Type A)
Secondary Entrapment Protection
Provision for connection of a non-contact sensor
(Type B1) and/or contact sensor (Type B2)
15.26”
39.6”
34.5”
15.74”
CLASS
CERTIFIED TO CAN/CSA C22.2 NO. 247
CONFORMS TO ANSI/UL-325
VEHICULAR GATE OPERATOR HP
53382
MODEL
SERIAL
VOLTS PHASE
AMPS 60 Hz MAX GATE LOAD
DoorKing, Inc., Inglewood, CA
13”
Model #
Max Arm
Length
Horsepower - Volts
1 HP - 115 VAC
1 HP - 115 VAC 1602-080
1602-081 28 Ft.
28 Ft.
Speed
90°
5.5 Sec
5.5 Sec
Amp
9.7
9.7
Convenience
Open
No
Yes
Use this manual for the Model 1602 operators with circuit board 1601-010 Rev V or higher ONLY.
Note: 208/230/460/575 VAC input voltage can be connected
to the operator by installing an “Optional” High Voltage Kit
(P/N 2600-266).