6 manual operation of the arm, Optional” manual release kit – Controlled Products Systems Group 1602-090 User Manual

Page 29

1601-065-L-3-13

5.6 Manual Operation of the Arm

When a power failure occurs in an operator WITHOUT the convenience open feature with the arm (3-piece arm for the 1602) in
the down position and the pathway needs to be open, the arm MUST be unbolted from the hub with 4 bolts and removed to
clear the pathway. A manual release kit is offered from DoorKing to phisically crank the arm up if desired (See below).

Operators WITH the convenience open feature can be set to automatically open the arm(s) during a power failure.

“Optional” Manual Release Kit

DoorKing offers a kit designed to be installed on the 1601 or 1602 barrier gate operators WITHOUT the convenience open
feature. It provides a crank tool to manually move the arm up or down. DO NOT install on convenience open models. For
further information about this kit, refer to the instruction sheet provided with the kit (P/N 1601-270) or go to DoorKing’s
technical web site at: www.dkaccess.com.

Aluminum Arm Bracket

Plastic Arm Bracket

Wood Arm Bracket

Hub

This manual is related to the following products:

1602-091