CONTREX MLP-Trim - Manual (Page 177)

C - 9
MP-52 ALARM STATUS
Alarm Status (MP-52 ) displays a number “1” to indicate the active alarm. In the example below,
“High Speed Alarm ” is the active alarm.
Low Speed Alarm
High Speed Alarm
Ramped Error
Scaled Error
Code
MP-53 CONTROL STATE
Control State (MP-53 ) displays a number “1” to indicate the active control state of the
MLP–Trim. In the example below, “Run” is the active control state.
Jog
Run
R-Stop
F-Stop
Code