INTELLINET NETWORK ICC-130 User Manual - Manual (Page 70)

- 70 -
Digital I/O
If your Intellinet network camera is equipped with a digital I/O interface, you
can configure the connections on this page. The screen shows the current
status of input 1 & 2 and output 1 & 2. The screen also allows you to define the
“normal” state of the port. The normal state can be viewed as the “non-alert-
state.”
LED
You can enable or disable the operation LEDs on your Intellinet network
camera. Hiding the LED indicator will make the camera appear to be offline
while in fact it is operational and captures video.