INTELLINET NETWORK ICC-130 User Manual - Manual (Page 54)

- 54 -
5.2.4 Event
Your Intellinet network camera supports so-called events.
When an event occurs, you can have the camera perform
an action, e.g., record a video to a remote location. This
section describes how to set up event servers, events,
motion detection and the scheduler.
Event Server
First you need to set up an event server, or multiple event servers. Click “Add”
to create a new event server.
1. How to add a FTP Server:
Name: Provide a name for the server.
Server Type: Select “FTP.”
Network Address: Type in the
address of your FTP server. Do
not type in leading ftp:// or
trailing folder names.
Incorrect:
“ftp://networkipcamera.com/
camera_images”
Correct:
“networkipcamera.com”
Server Port: Leave at 21,
unless your FTP server uses a
different port.
User Name and password:
Provide valid login credentials
for the FTP server.
Passive Mode:
Select “On” if your FTP server
utilizes passive FTP, which is
the most common method.
Media Settings:
Here you define what kind of media you wish to upload (snapshot, video or
system log), how many images pre and post event you wish to upload, the
image file name and the suffix.