INTELLINET NETWORK ICC-130 User Manual - Manual (Page 57)

- 57 -
Event List
Now that we have created an Event Server, we can proceed with setting up
actual events. Click on the “Add” button to begin.
You need to specify the trigger type. The drop-down list below shows the
available options. Note that depending on your camera model, the options will
vary.
Item
Description
Motion Detection The camera monitors the video image for movements
and triggers an alert when it detects motion. Motion
detection needs to be configured first for that to work.
Tampering Detection The camera can detect if it’s being tampered with, e.g.,
if someone covers the lens, and triggers an alert when
this happens. Tampering detection needs to be
configured for that to work.
Digital Input If your camera is equipped with digital inputs (see
hardware installation guide), then you can use them as
a trigger mechanism. A common example would be to
use 3
rd party motion detection sensors that trigger the
camera to start a recording.
Periodical This trigger type can be used if you want the camera to
perform the same action over and over again, based on
a time period. A typical application would be to have
the camera refresh an image on your web site every 60
seconds.