Maintenance - language – INTELLINET NETWORK ICC-130 User Manual User Manual
Page 63
- 63 -
The following message will appear:
Click “OK” to continue.
Another message will appear:
Click on “Cancel” to abort the operation. Click on “OK” to start the upgrade
process.
You will see the following messages:
Note: You may see additional messages at this stage.
When you see this message, the upgrade has been completed. It may take up
to two minutes to re-gain access to the camera. If the camera no longer
responds, use the Windows IP Installer utility to find the camera and re-
configure the IP Address settings.
Maintenance - Language
You can replace the language in the user interface of your network camera. On
the Installation CD are different language files starting with “LNG_” and ending
with “.lang.” Click on Browse, select the language you wish to install and then
click on OK to begin the process.