Schedule – INTELLINET NETWORK ICC-130 User Manual User Manual
Page 61
- 61 -
Schedule
The Network Camera supports event trigger actions that can be based on a
schedule. This can be used, as an example, to only activate motion detection
between 9 pm and 6 am during business days and around the clock on the
weekends. You can set up individual schedules for each event type, so that
motion detection is activated between 7 pm and 7 am, but tampering detection
is only activated between 10 pm and 4 am.
Depending on your camera model, the screen layout will vary slightly.
There are three default schedules which you cannot delete, but you can modify
them.
You can create a new schedule by clicking “Add.”
First you need to provide a name for the schedule (not shown on image). Then
select a start and end time and click on “Add” for the day of the week the
schedule is supposed to be active. As soon as you add a schedule, the timeline
turns red, indicating the active schedule. If the schedule is the same for every
day of the week, you can activate the option “Use the same time schedule
every day.”