INTELLINET NETWORK ICC-130 User Manual - Manual (Page 56)

- 56 -
4. Adding a Network Storage
Server Type: Select “Network Storage.”
Type: Select a valid type for your
network storage (either Windows
SMB or Linux NFS).
Network Storage Location:
Enter the address of your local
storage server as shown on the
right. Example:
\\192.168.0.190\media
(192.168.0.190 is the local IP
address of the network storage
server. “media” is used in the
example to indicate that we want
to upload files into the sub folder
media)
User Name and password:
Provide valid login credentials for the network storage server.
Create Folder: Type in a folder name in which you want the camera to store
files. This field is optional.
Media Settings: See above.
Based on the information in our example, the camera would store files in this
location:
\\192.168.0.190\media\720p_dome
SD Card
If you want to record video footage on a local
SD card, you first must insert the SD card (see
hardware installation guide for details), and
then you must set the Memory Card to “on” and
format the card by clicking “Execute.”